How to Fix iPad Stuck on Apple Logo in No Time At All

iPads are great for sketching and watching shows on a bigger screen than iPod offers. Not only is the bigger screen a perk, but newer iPads come with better performance standards too. However, they aren’t exempt from their fair share of problems. Particularly, the iPad stuck on Apple logo problem.

This isn’t a new iPad problem, and for years we’ve seen many iOS devices get hit with it.

Fortunately, as a result of how common it is, the Apple community has done some digging, and a few general fixes have been found. We’re going to walk you through these fixes as well as a few definite fixes so without further ado, let’s get right into it.

Unless you have a very old iPad, or you are aware of a hardware issue, there are three reasons for the Apple logo loading screen being stuck.

  • An unsuccessful jailbreak could result in a stuck loading screen. This may be a result of faulty firmware or if you wrongly jailbroke the iPad.
  • iOS updates are known to have installation problems, and one possibility is a stuck screen.
  • Existing iOS files may have corrupted, and thus the iOS isn’t able to load properly.

Regardless of what is causing this problem, one of the fixes that we show you will fix it. Please keep in mind that if the issue is hardware-related, then you must contact an Apple store.

PS: if your iPhone volume buttons stuck, iPhone 12 Stuck on Confirm Your Phone Numberor you are facing the iPhone stuck on loading screen issue, here are the top solutions for you.

Fix 1. Force Restarting Your iPad

A simple force restart is always worth trying and has proven to be handy for simple iOS-related issues. If you don’t already know how to force restart, follow these steps.

Reboot iPad to Fix ipad stuck on apple logo
Step #1 – Hold both the “Power/Lock” and “Home” buttons simultaneously.

Step #2 – Your iPad will go black for a moment and when the Apple logo is shown, release the buttons.

Step #3 – After a few moments your iPad should load up normally.
Don’t worry if this doesn’t work for you; there are other solutions that you can try.

Fix 2. Restoring Your iPad with iTunes

If the problem is firmware related, then there’s a good chance that restoring will fix your iPad stuck on Apple logo problem.

ipad stuck on apple logo
Step #1 – Open iTunes on your computer and connect your iPad via USB cable.

Step #2 – Hold both the “Home” and “Lock” buttons down until the iPad’s screen goes black.

Step #3 – When the screen goes black, let go of the lock button but continue holding the home button.

Step #4 – Release the home button when you see the connect to iTunes display.

Step #5 – On iTunes, you’ll be given a choice to “Restore” or “Update”. Try the update option first but if it doesn’t work, click “Restore” and choose a recent backup to have restored.

Unfortunately, this will overwrite the data that is currently on your iPad. Of course, if there isn’t any data worth saving, then this is completely fine.

Fix 3. Remotely Erasing the iPad

For those who don’t care about the data on their iPad, you can remotely erase it. This is actually a very simple process and to fix iPad stuck on Apple logo, no interaction with the iPad is needed.

Erase iPad
Step #1 – Go to the iCloud website and sign into the iCloud account that is linked to your iPad.

Step #2 – Once you’ve signed in, click “Find My iPad” and choose your iPad from the device list.

Step #3 – Click the “Erase iPad” feature, and shortly after, your iPad will be completely wiped.
Again, this completely wipes your iPad’s data. With this in mind, if you have work files stored on it or any personal data, try another fix instead.

Fix 4. Fixing “iPad Stuck on Apple Logo” with FoneLab iOS System Recovery in 1-Click

Our first recommended solution is FoneLab iOS System Recovery. This program goes above and beyond when it comes to fixing iOS related issues. A few key features include:

  • Fix almost all iOS or iDevice issues, including how to reset iPhone X.
  • Easy to use and requires no technical knowledge.
  • Free version available so that you can try before buying.
  • Can be used to force iOS device out of recovery mode.
  • Also includes several iOS data management tools.

There are even more features, and if you check out the free version, you’ll get an insight into what those features are!

Steps to Fix iPad with FoneLab iOS System Recovery

Following on from above, we’ll be showing you how to use FoneLab to fix your iPad. Simply follow our guide below and in no time at all, you’ll regain access. Click it if you iPhone won’t restore, iPhone Stuck on Apple Logo or  iPhone is stuck in the recovery mode.

Download FoneLab Download FoneLab

Step #1 – Launch FoneLab iOS System Recovery on your computer and connect your iPad.

Step #2 – Select “iOS System Recovery” as this is the mode that we will be using.

Step #3 – Read through the briefing that is shown and click on “Start” to continue,

Step #4 – Information about your iPad will be shown. This will be used to reinstall the appropriate plugin needed for the repair, so if it’s incorrect, you must change it.

Fix ipad stuck on apple logo with Fonelab
Step #5 – The plugin that is needed will now be downloaded. During the download and installation do not disconnect your iPad for any reason as it will cause data corruption.

Step #6 – After the process is complete, check your iPad and make sure that it is fixed.

That’s all there is to it. You don’t have to be a professional computer technician to fix your iPad, and by following the steps above, you’ll have it fixed in no time at all.

Fix 5. Fixing “iPad Stuck on Apple Logo” with iMyFone iOS System Recovery With Ease

Another program that’s worth giving a go is iMyFone Fixppo iOS System Recovery. While it works in a similar way to FoneLab, iMyFone offers a different variety of useful features.

We highly recommend using the free trial version of iMyFone Fixppo. Even if your problem isn’t that your iPad is stuck on the Apple logo screen, this program will repair the device for you.

Steps to Fix iPad with iMyFone Fixppo (iOS System Recovery)

Still struggling with your iPad stuck on Apple logo? Not a problem: with the following steps you’ll fix it with ease.

Step #1 – After installing iMyFone Fixppo (iOS System Recovery), open it up and connect your iPad.

Download iMyFone Fixppo Free

Step #2 – From the main menu, select “Standard Mode” as this is what we’ll be using.

Step #3 – When the “Start” button is shown, click on it to proceed.

Step #4 – iMyFone will quickly scan your device for some basic information. The information will be shown on the following display and if any of it is wrong, manually change it.

Note: it’s important that all of this information is correct. Even if you think that it is all correct, double-check as a precaution.

Step #5 – Click on the “Download” button and sit back while iMyFone takes care of the rest.

Step #6 – It may take a while for the firmware to be downloaded although afterward, it will be reinstalled on your iPad and the issue should be repaired.

If you aren’t able to fix iPad stuck on Apple logo with Standard Mode, then we recommend trying Advanced Mode. This will erase your personal data although it is guaranteed to fix the problem.

Fix ipad stuck on apple logo with Fixppo
We understand the frustrations that these problems can cause, and we are constantly working on new ways to fix them. iMyFone Fixppo (iOS System Recovery) is a fantastic tool, and we don’t have any doubts that it’ll get the job done.

To Conclude

So, there you have it! If you have an iPad stuck on Apple logo screen then with the fixes above, you can fix it without too many problems arising. If you’ve tried the basic fixes, but they haven’t helped to fix your iPad, then our recommendation is to try using iMyFone Fixppo iOS System Recovery or FoneLab iOS System Recovery. Both are fantastic solutions for this particular iPad problem. Within just a few minutes not only will your iPad be fixed but no personal data will be lost in the process – they’re fantastic!

Related Articles

Back to top button