How to Fix iPhone Won’t Charge Issue Effortlessly

Don’t Worry About iPhone Won’t Charge Error

If your iPhone won’t charge, you do not need to worry about it as various people face this issue at least once with their iPhones.

Just like other smartphones, you have to charge iPhones as well after a certain point in time. You cannot use your phone when its battery is discharged off completely. You have to charge your iPhone depending on the usage time and for what you are using it for.

After plugging in your charger, there can arise a situation where your iPhone won’t charge either switched off or not. There can be many reasons why your iPhone won’t get charged. Here, you will know about all the possible reasons for this issue as well as fixes on how you can resolve this issue effectively.

To solve the charging problem of the iPhone, you have to look for other issues related to the cable, the power source, the charging port, or software. In this article, we will deal with all these issues and how you can resolve the problem of the iPhone won’t charge.

Here, you will know about some of the most common reasons why your iPhone won’t charge. Along with reasons, there are ultimate fixes to get rid of the issue. Let’s move on to our list of some of the best fixes to resolve the matter where your iPhone won’t charge.

If your iPhone won’t charge, you need to look for the specific issue and then, go for that specific solution. In most cases, users buy a new battery when their iPhone won’t charge.

However, a new battery would not solve the charging issue of your iPhone. The problem of charging is mostly concerned with software-related issues rather than hardware ones. Due to these internal issues, your iPhone resists getting charged.

Whenever you plug in the charger to your device, its software decides whether to charge it or not. The act of changing the battery is not going to have any effect on if your iPhone won’t charge. There can only be one hardware problem like a damaged charging port.

Apple’s customer support article suggests that you should update your device to the latest iOS version, which seems to be incorrect as to how can one do that if iPhone won’t charge.

Part 1: Try Hard Reset Your Device

In the first place, you should hard reset your device if your iPhone won’t charge on plug in the charger. There are different ways to reset different models of iPhones, which are given below.

For Older iPhones, 6S, 6S Plus, and SE:

You need to press and seize the Home and power buttons simultaneously until the Apple logo appears on your phone screen and then, release them.

For iPhone 7 Plus and 7:

You have to press and seize the Volume Down and Power buttons simultaneously until the Apple logo appears on your phone screen and then, release them.

For iPhone XR, XS Max, XS, X, 8 Plus, and 8:

You need to press and quickly let loose the Volume Up key and then, press and quickly let loose the Volume Down key, and lastly, press and seize the Power/Side key until the Apple logo appears on your screen and then, release it.

Note: Make sure to hold keys for a longer period. On iPhone X and 8, press the first two keys very quickly while keep holding the power key for 20 seconds or so.

Part 2: Examine Your USB Cable Against Damage

If hard resetting of your device does not solve the problem of the iPhone won’t charge, you can look for the hardware problem. On taking a very close look at the USB cable’s ends that you employ to charge your device, you can see signs of wearing off or fraying.

Apple’s cables are quite prone to wear off at the charging end of the phone. If these signs are quite visible, it is time to buy a new lightning cable.

To detect the problem, you can look for any physical damage to the cable. If not detected, you can try to charge your phone with a computer’s USB port rather than the wall adapter.

If it works fine, then your cable is not the culprit here. If not, then change it. You can replace your cable free of cost if your phone is under warranty.

On the other hand, try to use a genuine USB cable as third-party cables usually do not last a very long time. Do not go for cheaper cables but look for high-quality ones.

Part 3: Try Out a Different Charger

Your phone charger could be another reason for your iPhone won’t charge issue. Nowadays, you can charge your phone via a wall adapter, car charger, speaker dock, laptop, etc.

So, there are different ways to do it. However, it depends on the software that will charge the device or not. In situations of power fluctuations, the software stops your phone from getting charged due to protective measures.

So, you can try out a different medium to charge your device, whereas it is best to go for USB ports as these ports offer a limited power supply. Hence, the power supply can also cause a charging issue.

Besides, if you received a message like this accessory may not be supported, here is the best fix for you.

Part 4: Brush Off Debris from the Charging Port

So as to examine this situation, you have to take a glance at the bottom end of your iPhone’s charging port using a flashlight.

If you can locate gunk or debris there, it could be preventing the connection between the device and the cable. In case, connectors get blocked, your iPhone won’t charge in that situation.

You have to brush off gunk or debris stuck inside there. For this, you can use a toothbrush as it won’t conduct electric charges or harm the device.

Now, brush off the debris and gunk gently. Liquid damage could also prevent your device from getting charged even if you remove the gunk properly as it shorts out connections in the port.

Part 5: Enter the DFU Mode and Restore Your Device

In cases where an iPhone won’t charge, putting it in a DFU mode could also work. If you have checked for the hardware problem related to the charging port, USB cable, iPhone, or simple software-related problem, it is time to restore your device with the help of a DFU mode.

A DFU mode is a special kind of restore where all the data on your device will get deleted and restore your device to its factory settings. In this way, your device will be set up as a new device where all software issues will be sorted out including the “iPhone won’t charge” problem.

There are high chances as DFU mode has the capability of bringing a non-functional device back to normal again. However, if it did not work for you, read further to know about the best solution for iPhone won’t charge issue.

Part 6: Repair the Device

If the above-mentioned ways did not work out well for you, you have to repair your device anyhow. For this, you can visit any Apple store to fix issues like physical or liquid damage to your phone. The only solution they will propose is to replace the entire device.

If you have AppleCare+, it would be not a big problem, but if not, it can be really expensive for you. The charging problem of the iPhone could be really cumbersome as it feels like you have lost everything such as photos, videos, messages, etc. of your device.

But you don’t need to worry as there are better options to resolve the error “iPhone won’t charge” than this.

One of the best ways to repair your device today is through Puls. It is a very affordable and in-person service provider. They reach your home or other desired location within a period of 60 minutes. With some exclusive offers, there are chances to get discounts as well.

The best part about Puls is that it provides a lifetime warranty on their labor and parts. You have to pay only after they get done with the repair. Puls even repair charging ports of iPhones along with other small components that could not be possible at Apple stores.

With this service provider, you get a chance to recover your precious data as well as save money at the same time.

Part 7: Fix Your Device to Resolve the Issue

There is an ultimate solution for this iPhone won’t charge problem. Tenorshare ReiBoot is one of the great tools that help you to recover your device in every worst situation. It is quite a savior for iPad and iPhone devices that turn out to be stuck on ghost touch or black screen.

Tenorshare ReiBoot offers three modes of recovery to repair iOS devices successfully. In the standard Mode of recovery, there is no data deletion of any kind. If your device is causing you trouble, you should give this program a try.

Steps to Repair the Issue of iPhone Won’t Charge:

To get rid of the cumbersome problem of the iPhone won’t charge, follow some simple instructions as listed below.

Step 1: Connect the Device

After launching the program Tenorshare ReiBoot on your computer, you need to connect the iOS device to your system. After that, you have to opt for the Standard Repair and then, put your device in DFU mode to begin the repairing process with the Tenorshare ReiBoot program.

Tenorshare ReiBoot
Tenorshare ReiBoot

Step 2: Press “Fix Now”

Next, you have to click on the button “Fix Now” and enter the recovery or DFU mode. In order to enter the mode, press and seize the Sleep and Home buttons simultaneously for about ten seconds.

Let go of the Sleep button but continue to hold the Home tab for the next 5 seconds or so.

Tenorshare ReiBoot

If your device does not enter the DFU mode, the recovery mode could also work fine. For putting your phone in recovery mode, press and hold the Sleep and Home keys together. Keep holding it until the icon of “Connect to iTunes or Computer” appears on your screen.

Tenorshare ReiBoot

Step 3: Download Firmware

Now, you have to download the firmware for your iPhone. Just click on the option for “Download“, and the program will automatically detect your device’s model.

On pressing the “Download” button, the latest iOS version will start to download on your system. However, you can also download the latest firmware from other sources manually.

Then, choose the option of “Select it manually” to start the process of fixing the issue.

Tenorshare ReiBoot

Step 4: Tap “Start Standard Repair”

On the successful completion of the download, you have to tap “Start Standard Repair” to automatically start the repairing process against the issue “iPhone won’t charge.

After it gets completed, you have to check whether it has resolved the issue or not. If not, you need to try again.

Tenorshare ReiBoot
Tenorshare ReiBoot

Now, you know all the processes you have to go through on facing the problem where your iPhone won’t charge. You can start from the top to the bottom in order to repair your device effectively. After a successful repairing program, you can charge your device just like you used to.

If it is not a hardware problem, go for Tenorshare ReiBoot for iOS as it resolves all issues related to iPhones. Download Tenorshare ReiBoot to charge your device once again if your iPhone won’t charge!



Excellent software expert specializing in software & application testings, making comparisons, researching, and loves blogging, writing reviews, video tutorials, and the like.