Top Fixes for The Last USB Device Malfunctioned on Windows 10

A considerable amount of USB problems can arise with computers, both Windows and Mac.

A lot of the time, it can be from faulty devices and sometimes a faulty computer component, but most of the time, it’s because of a simple system error.

Even though system errors are annoying, they’re usually not too harmful, and fixing them is a matter of trial and error.

Recently there has been an increase in reports of the last USB device you connected to this computer malfunctioned. Luckily this isn’t a damaging error, and fixing it is easier than most think.

The error occurs when there is a problem with certain USB devices. As a result, it can stop a USB port or other devices from working properly. It’s mostly an inconvenience, and to help you with this error, we’ll be explaining the main causes and best solutions.

PS: What if you are facing the issues like how to enable USB debugging on broken screen, here are the best solutions for you.

Part 1. Reasons for “The Last USB Device Malfunctioned on Windows 10”

Sure, if the last USB device malfunctioned on Windows 10 occurs, it’s a USB problem.

But let’s get more specific than this and look at the exact reasons for the error happening.

  • Faulty USB ports that have been damaged and can’t effectively connect devices to the computer
  • A specific USB device is broken and cannot establish a connection
  • Windows system error is blocking USB connections (could affect all USB ports or just one)
  • Your USB device doesn’t support the Windows version you have

The main reasons for a USB malfunction range from hardware damage to system errors, and even incompatibility.

If the error is only a recent occurrence and you are sure there isn’t any damage, a system error is a likely source. Regardless, there are a handful of fixes we can try.

In addition, for people who are facing issues like Desktop Window Manager High CPU, these articles are just for you.

Part 2. Solutions to “the Last USB Device You Connected to this Computer Malfunctioned”

After vigorously trying to find out what the best ways of fixing this problem are, we’ve found three solutions.

The following guides can repair the last USB device malfunctioned Windows 10 for most people.

1. Uninstall and Reinstall USB Drivers

Start by checking if the problem is only happening with a single device.

If this isn’t the case and all devices have the issue, reinstalling your computer’s USB drivers can help.

  • #1 – Search “Device Manager” in the Windows search bar and select the best match.
  • #2 – Click on “Universal Serial Bus Controllers” to view all the USB drivers.
  • #3 – One by one, right-click on the USB drivers and select “Uninstall device.” Do this to uninstall every USB driver.
Reinstall USB Device Driver
  • #4 – After uninstalling the drivers, turn off your computer and turn it back on.
  • #5 – Windows will reinstall the default system drivers. Once the computer loads, go back to the Device Manager and check that the drivers are back.
  • #6 – Connect USB devices again and check if you are receiving the malfunction error.

On the other hand, only a single device could have an error.

If so, either try using another USB port or reinstalling the device’s drivers using the Device Manager.

2. Unplug the PCs Power Source

Power problems can silently affect electronic devices.

Computers aren’t any different, and if a simple restart doesn’t help, unplugging the power supply might.

  • #1 – Turn off your computer and wait until it is completely off.
  • #2 – Disconnect the power cable.
  • #3 – Hold the power button to get rid of excess electricity.
  • #4 – Connect the power cable and turn on your computer.

Since computers don’t have a battery, this is the approach we must take. For laptops, a different method can do the same thing.

  • #1 – Unplug your laptop from the power outlet.
  • #2 – Restart the laptop and wait until it loads up.
  • #3 – Connect all of your USB devices.
  • #4 – Plug your laptop back into the power outlet.

If the problem was due to the USB ports not receiving enough electricity to power the devices, both of these methods would resolve it.

3. Change Windows’ USB Settings

Powering issues aren’t just because of hardware, and there is a software aspect too.

Windows has built-in power management settings, which we can adjust and perhaps fix USB problems.

  • #1 – Search and select “Control Panel” using the search bar on your taskbar.
  • #2 – Click on “Power Options” on the list on the Control Panel menu.
Chage USB Settings
  • #3 – Next to the power plan that is active, click “Change plan settings” and then “Change advanced power settings.”
The Last USB Device Malfunctioned
  • #4 – An extensive list of power settings will now appear. Locate “USB settings” and expand it, and then expand “USB selective suspend setting.”
  • #5 – Disable this setting for the “On battery” and “Plugged in” power modes.
  • #6 – Click “Apply” to confirm the settings change and “OK” to close the window.

A lot of people worry about changing settings like this. However, if the last USB device malfunctioned Windows 10 keeps appearing, it’s worth taking a deeper look at your settings.

By the way, for the issues of the Windows can’t communicate with the device or resource, click to fix them now.

Part 3. Data Recovery After “the Last USB Device You Connected to This Computer Malfunctioned” Fixed

Losing Data from USB Device Malfunctioning

Were you unfortunate enough to lose data because of the last USB device you connected to this computer malfunctioned?

Recovering lost data is made possible with the data recovery program Tenorshare 4DDiG.

  • Recovers files that were accidentally deleted, corrupted, or lost
  • Easy to use for all users, beginner, and experts
  • Recovers files without overwriting the original files
  • Compatible with hundreds of file types for recovery
  • Can recover data from any type of storage device
  • Preview the recoverable data before finishing the recovery
  • Very high date recovery success rate

Recovering data couldn’t be any easier than it is with Tenorshare 4DDiG. The process is very simple and supports recovering photos, videos, music, documents, and almost any other type of file.

To fully utilize this data recovery program, you’ll need to buy it. There is a free trial version, but it’s worth mentioning it is very limiting and only lets users recover three files in total.

Steps to Recover Lost Data with Tenorshare 4DDiG

So, you download a copy of Tenorshare 4DDiG and install it on your computer, what’s next?

Follow the steps below to learn how you can use Tenorshare 4DDiG for retrieving lost files.

1. Connect the USB Drive to the PC

Launch 4DDiG on your computer and open it. And then please connect the USB drive where you lost your data to your computer.

After that, please choose the type of files you would like to recover and then tap the Start to proceed.

Tenorshare 4DDiG

2. Scan Your USB Hard Drive

After the target file documents were selected, 4DDiG will start to scan the hard drive to find your missing files. To narrow down the search, you can use the filter function on the left side of the panel.

Tenorshare 4DDiG - Scan USB Drive
Tenorshare 4DDiG - Fast Scan

3. Preview and Recover from the USB Drive

Now, you are allowed to preview and restore the lost files back on your computer to a protected location. Please do not save them to a similar location where you lost them to avoid overwriting and completed data loss.

Tenorshare 4DDiG - Preview and Recover

Tenorshare 4DDiG rarely doesn’t find lost files.

If you experience data loss from the last USB device you connected to this computer malfunctioned error, then using Tenorshare 4DDiG gives you the best chance of successful recovery.


USB malfunctions are unfortunate and aren’t always a quick fix. The upside is that these are rarely problems from hardware damage.

More specifically, if the last USB device malfunctioned Windows 10 appears, resolving it shouldn’t take too long. By taking on board the solutions above, quickly resolving any USB difficulties is made possible.

Better yet – if this unfortunate and interruptive error made you lose data, Tenorshare 4DDiG is perfect. You can recover any file type no matter how it was lost and from any storage device!


Ten years of experience in information and computer technology. Passionate about electronic devices, smartphones, computers, and modern technology.