One of the most common problems that can occur to your storage medium out of the blues is ‘the volume does not contain a recognized file system.’ This problem can take place in your external hard drive, SD card, USB, etc. There are various reasons why this problem takes place. The issue tends to be extremely annoying as you cannot access your own data. Thankfully, the problem is easily fixable, and the inaccessible data can be recovered as well.
PS: click here to fix the issues like ‘the file is too large for the destination file system error‘, and the ‘system volume information large‘, or 0x00000133 DPC_WATCHDOG_VIOLATION error effortlessly.
This is one of the common cases when it comes to the file not being recognized by the system problem. In this case, you do not have access to your data that is stored away on your hard drive. When you double-click on the hard drive partition, you will see a dialog box that informs you that the partition cannot be accessed. You will also see an error message that reads ‘the volume does not contain a recognized file system.’
In this case, there is nothing you can do much about except keep clicking on OK to close the error dialog box. The only working solution to this problem is to format the drive and start from scratch.
Hard disk turns RAW
This is the second type of error that normally occurs when you are trying to access your files in an external hard disk. You may notice that the disk suddenly becomes RAW; this means the drive contains no file system. Since the operating system is unable to read it, your access to the stored data is stopped. Similar to Case 1, the only solution to this problem is formatting.
Also, click here to fix 0xc000021a error effortlessly.
USB Devices becomes inaccessible
This is the final case of stored data becoming inaccessible when the problem arises with USB devices. This might happen due to various different reasons. And the solution to the problem depends on what caused it in the first place. You may try unplugging and plugging again, changing the USB port, etc. If you do not want to lose out on your data, it is suggested that you keep formatting as the last option.
Part 2: Recovering all your files and data before fixing the volume does not contain a recognized file system problem
While you have the option of solving the volume does not contain a recognized file system problem very quickly via formatting, you should understand that all your stored data might get lost forever. So, you need to look for a way to recover and back up your data before you attempt to fix the problem.
Luckily, recovering lost data is very easy, thanks to iMyFone AnyRecover. This software is completely safe and won’t overwrite any of your existing data while the recovery process brings your data and files back to life.
Some of its great features include:
- You can easily recover lost/deleted/inaccessible files from any storage medium such as memory cards, smartphones, camcorders, USB flash drives, and hard drives
- Your data will be recovered, no matter the cause and how it got deleted like accidental deletion, malware/virus attack, hardware malfunction, system crash, etc..
- You will be able to recover almost any type of file instantly because it supports 1000+ file formats
- iMyFone AnyRecover also supports almost all file systems such as NTFS, exFAT, FAT32, FAT, etc.
All you need to do is follow three steps to recover all lost or deleted data – choose the recovery mode, scan the storage medium, and preview and recover deleted data.
What is iMyFone AnyRecover?
When your computer crashes, or you encounter a common data problem, it might seem like your luck has run out. However, with the help of the right recovery tool, you will be able to recover all your lost data without any hassle.
You will see tons of data-recovery tools in the market today. Some of them are targeted at iOS devices, while others are made to cater to the needs of Windows and Android users. But there is no shortage of ways to lose your data, whether they are app files, voice memos, videos, photos, and emails. The same can be said for the number of devices that can face data problems like camera drives, thumb drives, virtual disks, solid-state drives, flash memory cards, personal computers, and Macs.
Because of this vast range of potential issues, it is recommended that you remain familiar with at least one recovery tool. With the help of iMyFone AnyRecover, you will be able to resolve almost any type of data-loss scenario, on mountable devices as well as computers.
iMyFone AnyRecover is quite easy to use; you do not have to be an IT expert to get back your file. The interface of iMyFone AnyRecover is so straight that you simply need to choose the type of problem that has caused your data loss. The software will then proceed to scan the affected drive or device accordingly.
iMyFone AnyRecover is quite a reassuring and reliable tool to have in hand in case of lost data, and the volume does not contain a recognized file system problem. The software runs extremely deep and offers you one of the best data-recovery rates in the industry; in short, it is something that you can count on.
Since iMyFone AnyRecover is a Read-Only process, there is no risk of corrupting or misplacing your data. This is an important distinction in the case of physically damaged drives. iMyFone AnyRecover will save you a trip to an expensive drive repair shop; even the software is priced competitively.
How do you recover lost/deleted files with iMyFone AnyRecover?
- Step 1: Once you launch the software, you need to click on All-Round Recovery mode from the home interface.
- Step 2: You then need to select the location where you want to save the recovered data and then click on the Next button on the bottom right corner.
- Step 3: You need to select the type of files that you want to recover. To do this, please click on the option ‘All File Types‘ to scan and view all the types of files you want to recover.
- Step 4: Once the scanning process is done, you will be allowed to preview the scanned files. You will have to select them and click on the Recover button on the bottom right corner. The files that you have selected will be recovered after a few minutes.
Part 3: Different ways and methods to fix the volume does not contain a recognized file system problem
Some more methods that can help you fix the issue are:
Format the Volume to NTFS
Formatting the Volume in a compatible file system or NTFS will solve the problem. Also, you should to remember that all your stored data will be erased. To solve the problem of the volume does not contain a recognized file system, you need to follow the steps mentioned below:
- Open the Windows Explorer and move the cursor to the Volume that you wish to format
- Right-click on that Volume and click on the Format option
- Here, you need to choose the NTFS under the File System and then click on the Quick Format Box
- Once you have followed the steps mentioned above, the Volume should get formatted almost instantly
- Updating all your USB Drivers
Update USB Drivers
At times, you might face an issue regarding your computer’s USB port, which then leads to several other USB-related problems like USB device not detected, the volume does not contain a recognized file system, etc. Such problems can occur due to a lot of reasons, one of them being obsolete USB drivers; hence, it is recommended that you update the USB drivers from time to time. If you do not know how to do that, you can follow the instructions mentioned below:
- 1. Head to the Control Panel and navigate to System
- 2. Click on Device Manager and then click on Universal Serial Bus Controllers
- 3. Next, you need to right-click on the USB component that you wish to update and then click on the Update Driver Software button
- 4. Follow all the instructions coming in next to update the USB drivers
Overall, it is quite easy to fix ‘the volume does not contain a recognized file system.’ What you should do is format the partition. Unfortunately, you might lose out on all the stored data and files on it. Hence, you must recover the data first with the help of iMyFone AnyRecover before formatting the partition. With this, you will be able to safeguard your valuable data and files.